• Home
  • Aboutkeyboard_arrow_right
    • keyboard_arrow_leftBack
    • History – How did we get here?
    • FAQ – Sheet Metal Work
    • How to contact us
    • What is sheet metal work
    • Lighting Industry
    • Terms & Conditions
  • Plant Listkeyboard_arrow_right
    • keyboard_arrow_leftBack
    • Corner Notcher and Notching
    • Cleaning Equipment
    • Edwards Pearson PR3
    • Fly Presses and press work
    • Guifil PE 6-16 CNC Bending
    • Haeger Bush / Stud Inserter
    • High speed sawing aluminium
    • Laser Cutting Sheet Metal Work
    • Power Press and press work
    • Rolling Sheet Metal Work
    • Safan e-brake CNC bending
    • Safan Guillotine and Cutting
    • Sawing angle, tube and bar
    • Spot Welding sheet metal
    • Stud Welding Sheet Metal
    • Trumpf 200R/3000R CNC Punch
    • Trumpf 7036 – CNC bending
    • Welding Fabrication Processes
    • Radan CAD/CAM Software
    • P4W Production Software
  • Toolingkeyboard_arrow_right
    • keyboard_arrow_leftBack
    • Trumpf standard 2D tooling
    • Trumpf non standard 2D tooling
    • What is CNC Bending?
    • What is CNC Punching?
    • CNC Bend Table – U Bend
    • CNC Bend Table – Z Bend
    • CNC Bend Table – Single
    • Bend Table – Small Joggles
  • Design Datakeyboard_arrow_right
    • keyboard_arrow_leftBack
    • Mild Steel and it’s Treatments
    • Stainless Steel and it’s Finishes
    • Aluminium and it’s Treatments
    • Paint & Powder Coating
    • Bend Sizes and Hole Positions
    • Sheet Metal Punching Rules
    • Sheet Metal Thickness
    • Gauge Conversion Table
    • Metric Tapping Drill Sizes
    • Welding Drawing Symbols
    • Sheet metal fabrication – assy
    • Box Fabrication
    • Bracket Fabrication
  • Blog
  • Gallery
  • Contact
menu
  • Home
  • About
    • History – How did we get here?
    • FAQ – Sheet Metal Work
    • How to contact us
    • What is sheet metal work
    • Lighting Industry
    • Terms & Conditions
  • Plant List
    • Corner Notcher and Notching
    • Cleaning Equipment
    • Edwards Pearson PR3
    • Fly Presses and press work
    • Guifil PE 6-16 CNC Bending
    • Haeger Bush / Stud Inserter
    • High speed sawing aluminium
    • Laser Cutting Sheet Metal Work
    • Power Press and press work
    • Rolling Sheet Metal Work
    • Safan e-brake CNC bending
    • Safan Guillotine and Cutting
    • Sawing angle, tube and bar
    • Spot Welding sheet metal
    • Stud Welding Sheet Metal
    • Trumpf 200R/3000R CNC Punch
    • Trumpf 7036 – CNC bending
    • Welding Fabrication Processes
    • Radan CAD/CAM Software
    • P4W Production Software
  • Tooling
    • Trumpf standard 2D tooling
    • Trumpf non standard 2D tooling
    • What is CNC Bending?
    • What is CNC Punching?
    • CNC Bend Table – U Bend
    • CNC Bend Table – Z Bend
    • CNC Bend Table – Single
    • Bend Table – Small Joggles
  • Design Data
    • Mild Steel and it’s Treatments
    • Stainless Steel and it’s Finishes
    • Aluminium and it’s Treatments
    • Paint & Powder Coating
    • Bend Sizes and Hole Positions
    • Sheet Metal Punching Rules
    • Sheet Metal Thickness
    • Gauge Conversion Table
    • Metric Tapping Drill Sizes
    • Welding Drawing Symbols
    • Sheet metal fabrication – assy
    • Box Fabrication
    • Bracket Fabrication
  • Blog
  • Gallery
  • Contact
 01489 577786

Blog

2018 2017 2016 2015 2014 2013 2012 2011 2010
CNC bending and foldingcnc punchengineeringEngineering and Sheet Metal Newslaser cuttingsheet metalSheet metal dataSheet metal fabricationsSheet metal facilitiesTrumpf manufacturing equipmentUncategorizedWelding

Pressing in studs with fly-presses

Saturday, May 14th, 2016

Flush head studs inserted into sheet metal products

Fly presses in action

Fly presses in action

We use flush head studs to provide a permanent stud (male thread) into a range of sheet metal materials and thicknesses. They might be aluminium, stainless steel but by far the most popular are mild steel and zinc plated studs. They come in a range of lengths from 6mm up to 50mm and from M2.5 to M8, other sizes can be achieved by special order. They act as a permanent screw thread in place of a screw for assembling components and are often used for an earth point in electrical cabinets and electronics chassis and gear trays. The example show here is of a light fitting gear tray and the studs are used a fixing positions for a lighting ballast.

Lighting gear trays with flush head studs

Lighting gear trays with flush head studs

The studs are often pressed in with our Haeger bush and stud inserter machine. It can cope with all studs, bushes, stand-offs and tank bushes. In this case we are showing one of our fly-presses being used to insert M3 x 18mm mild steel zinc plated flush head studs.

If you have a sheet metal component design and you are not quite sure what you need please just give us a call and we will be more than happy to help you with finding the right insert to suit you. Call us on 01489 577786 or send us your designs to sales@vandf.co.uk

Looking for sheet metal workers in the Winchester area?

Friday, May 13th, 2016

Manufacturing sheet metal work for companies in and around Winchester

Folding long sheet metal profiles

Folding long sheet metal profiles

V and F Sheet Metal have been manufacturing sheet metal work and welded fabrications for over 30 years now. We supply a wide range of sheet metal products from our base here in Fareham, Hampshire to companies in Hampshire and right across the UK to the lighting, heating, electronics and professional audio industries as well as a wide range of specialist companies across the UK. We often deliver products to Winchester, Eastleigh, Southampton, Portsmouth and Basingstoke as well as using overnight services to Scotland, Wales and the rest of the England.

When you are making long channel sections like these you need a bending machine that can provide the bending power and accuracy on bend size and angle right up to 3M long. Our Safan e-Brake 100 ton CNC press brake is just such a machine. Installed new in 2015 this machine is perfectly suited to the range of sheet work we tend to bend and provides a bending force that matches the longest work we can laser cut.

Sheet metal bending

Sheet metal bending

You can see here the guillotined blanks on the right hand of the bending machine and the finished folded U channels on the left hand side of the machine. You need a fair bit of space when it comes to producing parts like these and our 13,000 sq. ft. factory provides the flexibility to take on this type of work as well as higher volumes of smaller parts. You only have to look through some of our past blog posts and the gallery pages on the website to see the wide range of sheet metal work that we get involved with for our customers. From these 3M long sections to CNC punched and folded aluminium lighting gear trays, stainless steel support brackets, mild steel electrical cabinets, copper bus bars, brass display units, aluminium LED display PCB plates etc.

Bent galvanised steel sections

Bent galvanised steel sections

The final 3M long galvanised mild steel sections stacked on a pallet ready to be wrapped up and delivered to the customer. This batch was for 2 different channel cross sections and approximately 350 of each type.

If you are based in Winchester or the surrounding areas of Hampshire and you want to visit us to discuss your sheet metal projects in more depth or you simply want to send us your drawings to sales@vandf.co.uk please don’t hesitate and we will be happy to help you.

Looking for sheet metal workers in the Southampton area?

Thursday, May 12th, 2016

Sheet metal workers in the Southampton area

CNC punching sheet metal in Southampton

CNC punching sheet metal in Southampton

Based in Fareham right on the M27 we are perfectly positioned to supply sheet metal work and welded sheet metal fabrications to companies in the Southampton area. Working with a vast range of ferrous and non-ferrous materials we are happy to CNC punch thicknesses from 0.3mm right up to 5mm thick with our two Trumpf CNC punch presses, over 5mm we can easily handle with out Trumpf fibre laser. These particular aluminium CNC punched panels were made for an electronics company who used them to house control gear on pumping systems. Whether it’s small electronics housings and front panel, lighting modules or gear trays, support brackets or welded fabrications we are here to help you.

Sheet metal work in Southampton

Sheet metal work in Southampton

Here we have a typical small stainless steel bracket that we have just manufactured for one of our customers in Southampton. These components have been laser cut and have stainless steel PEM studs pressed in the ends, once they had been folded up they were used in conjunction with a small battery power portable LED lighting system. Whether it’s a few prototypes for a new design you are working on, repeat batches of sheet metal work or higher volumes we can cope with your needs.

So if you are looking for sheet metal work and you are based in the Southampton area please give us a call or pop in for a look around and see the range of services we can offer you.

Looking for sheet metal work in the Gosport area?

Wednesday, May 11th, 2016

Trumpf 7036 CNC bending

Trumpf 7036 CNC bending

We are based in Fareham, Hampshire with a 13,000 Sq. Ft. factory and we are well placed to manufacture sheet metal work for companies based in the Gosport area. Whether it’s laser cutting, CNC punching or CNC bending sheet metal work, as illustrated here we are happy to help you with your designs refining them for efficient manufacturing and produce a range of price options for you.

These sheet metal covers are relatively simple to produce (laser cut and CNC bent) and are typical of many products we manufacture for an array of customers large and small in Hampshire and further afield. We also produce more complex sheet metal fabrications using laser cutting, CNC punching, bending and welding techniques.

Folded sheet metal covers

Folded sheet metal covers

The machine shown here is a Trumpf 7036 CNC press brake. It’s one of 2 that we have which are 1M long and very quick. There are perfect for small batch production and prototype work but also equally at home folding up thousands of complex components.

So if you are based in the Gosport area and you have a product that you manufacture and it needs some sheet metal work please give us a call. We also produce sheet metal work for companies right across the UK and are happy to have you call in and see us in action producing sheet metal products.

Simple sheet metal projects

Wednesday, May 11th, 2016

Sheet metal plates

Simple sheet metal work

A simple sheet metal plate made from mild steel sheet. The parts have been CNC punched out on our Trumpf 3000 CNC punch press and they will be barrel de-burred to remove any sharpness from the CNC punching process before shipping to the customer. A simple sheet metal part, easily made in seconds on a CNC punch press and there’s not much else to say about this part except its typical of many simple parts we manufacture every day of the week here at V and F Sheet Metal.

Have a simple sheet metal component that you need for your project, please give us a call on 01489 577786 or e-mail your drawings to sales@vandf.co.uk and we will be happy to help you.

Sheet metal manufacturing

Monday, May 9th, 2016

A range of sheet metal parts demonstrating CNC punching, CNC laser cutting and CNC bending in a sub-contract manufacturing environment. Virtually all the sheet metal projects that we manufacture for our customers use one or more of these production processes to produce the parts to our customer’s design. This is where most investment goes and the technology is supported by sophisticated software and control processes. Some of these parts can be laser cut or CNC punched out from standard sheets of metal in seconds and with quick setting CNC press brakes can be bent in minutes. These techniques lead to competitive prices for small batches of parts when our customers cannot commit to higher volumes.

To see the advantages of these production techniques in a modern manufacturing factory please contact us with your project. You can speak to our engineering team on 01489 577786 or send us your drawings in DXF, DWG, SAT, STEP or PDF format and we will be happy to help advise you on your designs and produce prices for you.

Laser cutting sheet metal light fittings

Thursday, May 5th, 2016

Laser cutting sheet metal light fitting gear trays

I always like it when a laser cutting or CNC punching nest completely fills a sheet of metal. This laser cutting nest of 0.7mm zintec lighting gear trays was just such a job. Being able to get the most from a sheet of metal helps to keep the costs down for our customers and speeds up production with less handling time. The middle image above shows this really well and the other two detail some of the features that were so easily laser cut. After several small batches of samples and development work this was the first production batch of 100 parts. If the volumes increase to many hundreds per batch then I may well look to move this job to one of our Trumpf CNC punch presses to increase the speed that the holes are processed but at the moment the Trumpf fibre laser is perfect for this job. Being able to move jobs between different production methods is a useful way of saving our customers money and time when a particular machine is busy.

If you have a sheet metal project that needs to be laser cut or CNC punched please give us a call on 01489 577786 or send us an e-mail with your drawings to sales@vandf.co.uk

Welding mild steel plates and bars

Wednesday, May 4th, 2016

Welded fabrications

Welded fabrications

Here’s an unusual project for us here at V and F Sheet Metal, a welded plate and bar fabricated assembly. The bars have been machined from mild steel and free issued to us. We laser cut the circular plates and then welded them in plate as you can see in the image here. Finally we had the welded assembly zinc plated and colour passivated. The final welded fabrication was used to support light fittings in the ground.

Although we predominately produce our work from sheet metal in ferrous and non-ferrous alloys we do also make up fabrication like this when needed for our customers. When you are a sub-contract engineering company you have to be able to turn your hand to any project that comes along from your customers.

Perhaps you are looking to have a welded fabrication project manufactured in the near future, please give us a call and we will be happy to help you.

Sheet metal components in April 2016

Sunday, May 1st, 2016

Sheet metal components

Sheet metal components

Here we are at the end of April and here’s another couple of sheet metal components that we have made this month. They are typical of the sheet metal components we make on a daily basis for our UK and European customers and they were each made in batches of several hundred. The components have been CNC punched and bent up from zintec coated mild steel sheet metal. If you click on the image you can see 3 holes in the middle of the component that have a plunged form and are used with self tapping screws. We have the tooling for M3, M4 and M5 as standard in our Trumpf CNC punch presses. Once we had finished them they were used to hold control gear for industrial light fittings and were just left self colour zintec as this was good enough for the warm dry environment into which they were going.

Sheet metal brackets

Sheet metal brackets

These brackets were laser cut and then CNC folded on one of our CNC press brakes. They were also made from zintec sheet metal and are used by a pump control company to hold a pumping system in place where beer is pumped from the kegs to the bar in public house cellars.

For more information on sheet metal components and how we go about making them take a look at our web page “What is sheet metal and how is it made”

Folded sheet metal work

Wednesday, April 27th, 2016

Folded stainless steel brackets

Folded stainless steel brackets

Stainless steel folded brackets

Here are two recent folded sheet metal work projects I have chosen at random to demonstrate the versatility of sheet metal. These stainless steel brackets have been laser cut with the fibre plastic protective film in place and then folded again on our Trumpf 7036 CNC press brakes. These brackets were made in a batch of 30 parts and are made perhaps twice a year. Both CNC bend programs along with the CNC punching and laser cutting programs are stored on our company server and are available to the machine setters as all the CNC machines are on our company network. This leads to quick retrieval of past programs and storage of updates for any person who needs to access them.

Folded aluminium brackets

Folded aluminium brackets

Aluminium folded brackets

These 1.2mm thick aluminium brackets have been CNC punched and folded up on one of our Trumpf 7036 CNC press brakes. The batch size was 250 parts and they were a repeat order which we make several times a year. We can manufacture virtually any type of sheet metal brackets in mild steel, galvanised steel, zintec, aluminium, stainless steel, aluminium alloys, copper, brass or pre-painted materials. For more examples of sheet metal brackets please take a look at our gallery.

Please give us a try and we will be happy to quote for your folded sheet metal work needs.

Laser cutting copper sheet metal work

Monday, April 25th, 2016

Laser cutting copper sheet metal

Laser cutting copper sheet metal

Having a fibre laser cutter has been a great advantage to us when it’s come to cutting out blank shapes from copper sheet. These simple triangle shapes could have been CNC punched but we would have wasted more material, we would have had to edge de-burr all the shaped to remove the CNC punch marks and the process would have been a lot slower. The Trumpf 3030 fibre laser cutter cut the parts straight out without any edge de-burring and used all the sheet here possible to get the best fit of components.

Laser cut copper sheet metal parts

Laser cut copper sheet metal parts

The pattern of copper triangles was arranged by using our Radan CAD/CAM software with it’s schedule module. It enabled us to mix several different shapes and sizes of copper parts together all laser cut from the same thickness sheet to save material and money across the whole project. Whenever we are working with expensive materials like copper sheet we try all possible solutions to get the best material yield when quoting for the work and then actually laser cutting it.

If you have a sheet metal project in copper or brass and you have been told it can’t be laser cut, look again, up to 6mm thick and we can laser cut it for you.

Bending large sheet metal trays

Friday, April 22nd, 2016

Large folded stainless steel trays

Large folded stainless steel trays

Our new Safan e-Brake 3M CNC press brake is more than capable of bending these large stainless steel roofing trays with it’s 100 Ton bend press force. These 1.5mm stainless steel trays were laser cut from 3M x 1.5M sheets with only one coming from each sheet. They were then bent up on the press brake before finally having each corner joint seam welded to produce a water tight roofing tray for living roof systems. As well as folding large stainless trays such as these show here you can find us on most days folding zintec profiles, aluminium boxes, stainless steel brackets, pre-painted gear trays or mild steel enclosures. The Safan e-Brake is such a versatile machine for bending sub-contract sheet metal work that it was definitely the right machine for us.

CNC press brake bend tooling

CNC press brake bend tooling

The tooling system with the Safan is very flexible, it’s show here with swan neck tooling ready to fold the deep stainless trays shown above. It allows us to share tooling with our 2 Trumpf 7036 CNC press brakes across it’s 3M long bed. By using extension adaptors we can fold very deep sections, trays, boxes etc. as well as safe edge, standard V bends and tight sections using swan neck tooling.

If you have a sheet metal project that needs bending, the chances are we will have standard tooling at no cost to yourself that we can use to produce your parts. Why not send us your drawings and we will be happy to take a look and produce some prices for manufacturing.

Small sheet metal brackets

Wednesday, April 20th, 2016

Small sheet metal brackets

Small sheet metal brackets

Small sheet metal brackets are a typical component for V and F Sheet Metal to manufacture. We regularly make just a few small brackets for a special project or repeating batches of many hundreds. Some of our sheet metal projects can be for many thousands of small bracket either CNC punched, laser cut of with dedicated tooling. These particular small brackets were CNC punched and CNC bent using our Trumpf sheet metal manufacturing equipment.

If you are looking to have small sheet metal brackets manufactured to your own designs then please give us a call on 01489 577786 or send us an e-mail with your drawings and we will be happy to help you with price options, design ideas and production. If you are looking for a KanBan call off that can be organised as well to suit your volume needs.

Hello world!

Friday, April 15th, 2016

Welcome to WordPress. This is your first post. Edit or delete it, then start writing!

CNC punched earth bars

Monday, April 11th, 2016

Sheet metal earthing bars

Sheet metal earthing bars

When you want images, numbers, letters or symbols stamped into sheet metal that are permanent there’s no better way than using a CNC punch press. We have 2 CNC punch presses and both can take the same tooling enabling us to be flexible when it comes to production. These earth symbols have been CNC punched using a customer made punch tool and are clear even after zinc plating.

If numbers or letters are needed there are several tooling options which can be used such as alphanumeric holders for part numbers and stock codes. Larger images can be stamped in one hit but the clarity depends on the material and needs careful design and advise from the tool makers.

I would always say it’s worth asking us if you have an idea that needs stamping into a sheet metal product and you are not sure because we are always happy to check the feasibility with the tool makers for you before you need to commit to any tooling costs.

Rolled mild steel sheet metal rings

Thursday, April 7th, 2016

Rolling mild steel rings

Rolling mild steel rings

A simple rolled mild steel ring for a light fitting manufactured from 0.9mm thick material. This simple component has been CNC punched from sheet metal, rolled into a ring and then stitch welded at the joints to produce a circular band. Once the bands were all welded together they were then welded to a perforated disc to produce a vented top panel for a high bay light fitting. If you look carefully at the picture you can see small tabs on the edges of the rings which have been designed to engage in slots on the perforated rings to speed up welding alignment. You will see this technique again and again in our blog posts as it’s such a powerful way of ensuring accuracy in welding and speeding up production rates without costing a lot of money.

Perhaps you have a sheet metal projects that is welded together from several parts and this technique could save time and money. We are always keen to help you and would be happy to take a look at your design and see if we can save you money. Please call us on 01489 577786 or send your designs to sales@vandf.co.uk

Laser cut stainless steel grids

Tuesday, March 29th, 2016

Laser cut stainless steel grid

Laser cut stainless steel grid

We had a project to produce stainless steel drainage trays for a customer of ours who makes living roofs. The type of roofs that have grass and plants growing across them on schools, bus shelters, nature hides etc. The roofing systems have a series of stainless steel trays laid over the roof with the plants growing and a drainage system to take the water away. The trays have welded corners and a simple gutter / down pipe system to take the rain water away. Inside each roof tray there is a filter system consisting of this stainless steel grid which is welded in place around a drainage hole allowing a filter media to be positioned to hold back the growing media.

The stainless steel grid was laser cut from the same parent sheet as the drainage trays and designed to fit perfectly with small tabs that located into slots in the tray to aid positioning when being welded. We even left more material when we had to bend the grids so there was enough stainless to bend cleanly, this is the advantage of using a laser cutting machine even on small volume projects.

Bespoke sheet metal work from V and F Sheet Metal in Fareham Hampshire

Monday, March 21st, 2016

Here we have 3 quite varied examples of sheet metal work manufactured in our modern factory. They show perfectly the flexibility of production equipment we have when producing batch sheet metal work for our customers.

Laser cut brass clamping strips

Laser cut brass clamping strips

One of the more unusual materials that we work with from time to time is CZ108 brass sheet. We could have CNC punched these parts but with the complex arrangement of curves, several special shaped punch tools would have been needed which the 250 off batch didn’t really support. Luckily having a Trumpf fibre laser machine cutting brass up to 6mm thick isn’t a problem for us. These parts were laser cut straight from the sheet with the holes and external profiles programmed with our Radan sheet metal software. A quick barrel de-burr and the parts were ready for our customer.

Aluminium CNC punched discs

Aluminium CNC punched disks

Here we have a batch of circular discs that have been CNC punched out from 3mm thick 5251 aluminium alloy. All the holes and internal cut-outs were produced with standard CNC punch tooling on our Trumpf 3000R CNC punch press. The outer circular profile was produced on the same machine as the last punching operation with a curved “banana” punch and die allowing the finished part to fall from the parent sheet of metal and into a collecting bin under the machine. A quick edge de-burring operation and they were ready for powder coating.

Galvanised steel sheet metal brackets

Galvanised steel sheet metal brackets

A more standard production job for us here at V&F is producing sheet metal work whether laser cut or CNC punched from galvanised steel sheet metal. These light fitting parts have been CNC punched, edge de-burred, CNC bent up and have a hank bush inserted.

For more free advice and prices on your specific sheet metal projects please don’t hesitate to contact us on 01489 577786 or send us your drawings or 3D CAD data to sales@vandf.co.uk and we will be happy to help you more you sheet metal projects forward.

CNC punched sheet metal work

Wednesday, March 16th, 2016

CNC punched aluminium front panels

CNC punched aluminium front panels

Nice range of simple aluminium electronic front panels for professional audio equipment. With the large range of CNC punch tooling we have here most shapes and sizes of cut-out can be catered for without the need to purchase special CNC tooling. We have a list of all the CNC punch press tooling that you can specify when creating a new sheet metal design to make it easy for you to save money. If you are not sure you only have to call us and we will be happy to advise you on the best set of tooling to do the job. These front panels were CNC punched and had all external punched edges de-burred before they were wet spray painted and shipped. Sets of similar parts were all CNC punched on the same sheets to save material costs and keep the parts together in production.

CNC punched clamping bars

CNC punched clamping bars

Small aluminium clamping bars used in electronics equipment. These sheet metal bars were CNC punched on our Trumpf 200 CNC punch press using standard tooling. The parts were punched down through a die and collected from the machine with no corner holding tags. The parts were then barrel de-burred to remove all the sharp edges and finally, using our Haeger inserter, had their flush head studs pressed in place. The Haeger inserter can also be used to insert hank bushes, self clinch nuts, tank bushes, stand-offs and special purpose fasteners.

CNC punched zintec plates

CNC punched zintec plates

A simple 0.7mm thick zintec coated mild steel bracket blank produced on one of our CNC punch presses. The radiused corners being produce with our R2, R3, R4 and R5 combination punch tool. These parts are typical of the small sheet metal work that we CNC punch out all the time here at V and F Sheet Metal. If we don’t have quite the right tooling on the rack we can always look to laser cut the parts, so between both manufacturing processes we can cover all your sheet metal blank needs in ferrous and non-ferrous materials.

If you are looking for a supplier of sheet metal work then please give us a call on 01489 577786 or send your drawings to sales@vandf.co.uk and we will be happy to review them and produce some prices for manufacturing.

Sheet metal work suppliers

Monday, March 7th, 2016

Sheet Metal Work Suppliers

CNC punching sheet metal brackets

CNC punching sheet metal brackets

Here we have our Trumpf 200 CNC punch press punching out a thin gauge zinc coated mild steel (zintec) sheet metal bracket with many others from the same 2M x 1M sheet. You can see that the brackets has been spaced 5mm apart so that a standard slitting tool could CNC punch along the left hand and right hand of 2 parts at the same time, a technique known as common line cutting. This simple but effective technique helps us supply sheet metal blanks from the CNC punch press quicker and saves money when quoting for the parts.

This project was interesting in that we started producing the brackets on our Trumpf 3030 fibre laser and when we had other urgent jobs we simply swapped it to our Trumpf 200 CNC punch press which was more than capable of producing the parts.

CNC punched brackets in zintec mild steel

CNC punched brackets in zintec mild steel

Whether you need sheet metal worked that has been laser cut or CNC punched we have a solution for you. As sheet metal work suppliers to a range of UK industries since the mid 1980s we have many standard CNC punching tools to eliminate tooling costs in most cases. Along with our new laser machine we have just the right range of services to supply you with the quality and quantity of sheet metal work supplied at the right price. For more information please give us a call on 01489 577786 or send your drawings to sales@vandf.co.uk

Radan sheet metal software case study

Thursday, March 3rd, 2016

We are really pleased to have been chosen by Radan to be featured in a case study on the use of their software. We have been using Radan CAD/CAM software for over 16 years to help us produce sheet metal work from a range of machines. We use Radan software to produce 3D models from scratch and to read 3D models sent to us by our customers. We also use it to develop our 2D flat blanks which can be either CNC punched or laser cut with our Trumpf manufacturing equipment ready to be bent using a range of CNC press brakes.

We have always valued the support we get from the Radan team and the continual development in the software to support a range of new features in sheet metal manufacturing machines.

Please follow the link to our Radan case study for more detail.

Folded sheet metal work

Monday, February 29th, 2016

Folded sheet metal work produced here at V and F Sheet Metal

Folded mild steel brackets

Folded mild steel brackets

Great example of simple mild steel channel brackets that have been CNC punched and then CNC bent using one of our Trumpf 7036 CNC press brakes. These sheet metal projects are typical of the folded work that we are involved with everyday of the week for our UK customer base. Many parts that we fold up have to meet tight tolerances, such as +/- 0.2mm and we can achieve that in thin gauges due to the accuracy of the blanks we can produce via CNC punching and laser cutting as well as the high quality CNC folding facilities we have within our company.

Folded aluminium sheet metal trays

Folded aluminium sheet metal trays

CNC punched and CNC bent aluminium chassis trays are no problem for us. We have a range of standard CNC punch tooling that enables us to produce your electronics holes, cut-outs and profiles without the need for new tooling in the vast majority of cases. These chassis trays were produced with a protective plastic film on the outside and then treated with an Iridite NCP finish before sending to our customer. We are often asked to finish a sheet metal project be it powder coating, wet spray painting, anodising and Iriditing aluminium or zinc plating mild steel. We have a network of suppliers who can provide these finishes and offer design help for more complex parts to ensure there aren’t any problems when being treated.

Laser cut and folded mild steel brackets

Laser cut and folded mild steel brackets

These mild steel brackets were laser cut, folded on our Trumpf 7036 CNC press brake and formed with simple tooling we made up to go on our fly-presses. They show nicely the range of manufacturing techniques that can go into the simplest of sheet metal parts.

For more information on the range of bending / folding options we can offer you from the smallest stainless steel spring clip to 3M long folded sheet metal sections. Have a sheet metal work project that needs folding, please give us a call or send your drawings to sales@vandf.co.uk and we can offer you free advice if needed and quote options to see what will work best for you.

Laser cutting brass sheet metal

Thursday, February 25th, 2016

Removing brass scrap pieces

Removing brass scrap pieces

It’s not often that we get a laser cutting job that can really show off the ability of our Trumpf 3030 fibre laser cutting machine here at V and F Sheet Metal but here is one such sheet metal project. We were asked to cut 2 decorative brass fretwork panels and our laser cutting machine was perfect for the task. The brass panels were to be manufactured from 2.5mm thick brass sheet and laser cutting was no problem for us having a fibre rather than CO2 laser cutting machine. The Trumpf fibre laser cutter is able to cut up to 6mm thick brass sheet so this order was no problem.

Complete brass laser cut panels

Complete brass laser cut panels

I took the DXF files supplied by the customer and cleaned them up. They had various errors in them including lines upon lines, corners not joining in places and more importantly points where if we had followed the drawing the brass panel would have fallen into several parts. All the drawing was cleaned up using our Radan CAD/CAM sheet metal software and small changes were made to suit laser cutting. The “clean” file was then programmed for laser cutting and the 2 panels needed laid out on a single 2500mm x 1250mm sheet.

Laser cut brass sheet fine detail

Laser cut brass sheet fine detail

With both parts laser cut and the sheet automatically cleared from the machine it was only left for us to remove the internal waste parts to reveal the finished brass fretwork panels.

Perhaps you have a brass sheet metal part that you didn’t realise could be laser cut with modern fibre laser technology, please give us a call on 01489 577786 or send us your drawings to sales@vandf.co.uk and we will be happy to help you and advise where you designs can be improved to save you money.

Folding sheet metal housings

Monday, February 22nd, 2016

Folding sheet metal housings from 0.9mm mild steel sheet metal

Our Safan e-Brake CNC press brake is more than capable of folding sheet metal work up to 3M long and with 100 tons of electric motive force you can see that these sheet metal housings were no problem. With each sheet metal housing having 8 full 90 degree bends to complete the enclosure to hold the electrical components for an emergency exit light. The order was for 500 housings and the blanks were produced on our Trumpf 200 CNC punch press to ensure they were precise and would produce an accurate component throughout the batch. The Safan e-Brake is fast, very quiet to operate and easy to program, making it the perfect machine for light sheet metal work batch production such as this.

Sheet metal housings such as these are our bread and butter and we are often found manufacturing sheet metal housings from special projects to repeating batches of 25 and 50 up to 500 like this and beyond when needed. Have a sheet metal housing and need a price, please don’t hesitate our engineering team and we will be happy to help you.

Sheet metal work produced in Hampshire, UK

Thursday, February 18th, 2016

Sheet metal work produced in Hampshire, UK

Here’s a small cross section of sheet metal work that we have produced in February 2016. Having such a wide range of customers in many different industry sectors allows us to gain a vast range of experience in manufacturing in different materials, thicknesses and sizes. From small clips and bent angles, painted front panels, anodised rear panels, zinc plated brackets, zintec folded sections, welded sheet metal fabricated assemblies we can deal with it for you here in our manufacturing site at Fareham, Hampshire.

What is sheet metal work and how is it made?, take a look at the link and we fully explain how we go about manufacturing your sheet metal work in a modern CNC controlled environment.

Looking for a new sheet metal worker based in Hampshire, UK, give V and F Sheet Metal a try and we will be happy to help you develop your ideas and produce the products you need at the right price. Call us on 01489 577786 of send your drawings to sales@vandf.co.uk

Laser cutting sheet metal work

Monday, February 15th, 2016

Laser cutting mild steel sheet metal work

Laser cutting mild steel sheet metal work

Laser cutting mild steel sheet metal work

I happened to be walking past our laser machine when the access doors were open and I took the chance to get this nice image of a full sheet of laser cut parts. The sheet of mild steel is full of the same components nested together to make the most efficient use of the material, click on the image and you will see what I mean. This “true shape” nesting is achieved automatically with our Radan CAD/CAM software which not only saves us material but can be used to trial different programs at the estimating stage before an order is placed to get the best possible price. These parts were all cut with oxygen and once they had been folded up they were zinc plated which moves all signs of any laser cutting on the surface of the sheet metal. The oxygen cut in this thin gauge produces a perfect finish without the need to do any edge de-burring operations.

If you have a ferrous or non-ferrous sheet metal project that needs laser cutting please give us a call or send us your drawings to sales@vandf.co.uk and we will be pleased to quote you.

Folding sheet metal brackets to your design

Thursday, February 11th, 2016

Mild steel blanks

Laser cut blanks ready for folding

Before we can fold any sheet metal work we need to produce a developed blank shape. This blank has to be the correct size so that when it’s folded up it becomes the size and shape required for the customer’s drawn design. Using our Radan CAD/CAM sheet metal software we are able to simulate the component as a 3D model and then unfold the part to create the correct blank ready for folding on one of our CNC press brakes. The blanks can be CNC punched or CNC laser cut, these brackets have been laser cut using our Trumpf 3030 3KW fibre laser, a brand new machine installed in 2013 to boost the blank production capacity along side our 2 CNC punch presses. The accuracy of the blank is essential in achieving an accurately folded sheet metal bracket and the laser certainly gives us this accuracy and control over the profile finish.

CNC press brake tooling with mild steel brackets

Folding sheet metal brackets on a Trumpf 7036

Here are the components before they have been folded up and after. The brackets are relatively simple with just 4 x 90 degree bends which have all been created with the same V block and blade tooling. The CNC program to fold up the brackets has been written at the machine and then saved away onto our company computer network for recall at a later stage if the components are manufactured again. The folding process is relatively simple using the same tooling and simply folding one bend and turning the component over and then bending again to create the Z shapes seen in the photograph.

Lighting control gear tray brackets

Folded mild steel brackets

And the final folded brackets stacked ready to be packed up and sent off to the zinc platers for treatment. These folded sheet metal brackets are typical of the smaller parts we often manufacture here at V and F Sheet Metal on our Trumpf 7036 CNC press brakes.

If you have a sheet metal design that needs folding up be it 0.7mm mild steel brackets, 2mm stainless steel angle brackets, 3mm aluminium chassis components etc. please give us a call on 01489 577786 and we will be happy to chat through your idea with you. Or perhaps you have a drawing you want to send to sales@vandf.co.uk and our engineering team will be happy to review it and produce a range of price options for you.

CNC punching thousands of holes with a cluster tool

Wednesday, February 10th, 2016

Aluminium chassis components

Aluminium chassis components

These aluminium chassis components are used in electrical test equipment and are typical of the sheet metal work that we manufacture for many of our customers in the UK using CNC punching and CNC bending equipment. This batch of 25 components were then sent out to be Iridite NCP treated and then black spatter painted to our customers drawings.

Thousands of holes punched with cluster tools

Thousands of holes punched with cluster tools

When you want to produce potentially 1000’s of holes quickly and accurately in sheet metal components the best solution is to use cluster tools. These CNC punch press tools are single tools with many individual punched and dies in set patterns. On our Trumpf 3000R CNC punch press we can punch approximately 75 holes per second with our most productive tools that were used to produce this vent pattern here. We can produce complex parts with laser cut profiles and cluster punched holes patterns as a hybrid between two machines when needed bring the best strengths of each machine to a single sheet metal component.

Laser cutting curved profiles in aluminium sheet metal

Tuesday, February 9th, 2016

Laser cut aluminium sections

Laser cut aluminium sections

Looking for aluminium profiles with curved shapes? With a laser cutting machine the curved profile can be easily created, such as these light fitting accessories where curves can blend perfectly back into straight lines. Not only is the profile clean but at this gauge there is no cutting burr on either side of the of the sheet metal. Each of these parts were approximately 200mm long and were cut in seconds with many being nested together from a standard 2500mm x 1250mm sheet of metal.

These are just simple parts, some laser cut components that we cut here in Fareham Hampshire can be very complex. All the parts that we laser cut are programmed with our Radan 2016 sheet metal CAD/CAM software.

Where you are looking for laser cut aluminium, stainless steel or mild steel components our Trumpf 3030 3KW laser produce your parts. And being a fibre laser cutting machine it can cope with copper and brass sheet right up to 6mm thick. If you have a drawing you want us to look at then please send it to sales@vandf.co.uk or give our engineering team a call on 01489 577786.

Big effort from a small CNC press brake

Friday, February 5th, 2016

Bending up to 1M long

Folding sheet metal work

Just because we use our two Trumpf 7036 CNC press brakes for bending small parts doesn’t mean they cannot help out when folding larger sections. Right up to 1M long is no problem for these great little machines and with 36 tons force they have more than enough force to fold up these zintec chassis sections. This image clearly shows the 1M tooling across the top and bottom of the press with plenty of room to access the machine for quick production bending speeds.

3D graphics and a touch sensitive screen allows the shop floor machine setters to write CNC programs really quickly, store them away on our company server and recall them for repeat batches of work whenever needed. These machines are a big part of what we do here at V and F Sheet Metal with the majority of our bending work being under 1M long but when parts are over 1M long we have our new Safan e-Brake 3M 100 ton machine to take over. This new machine can obviously bend items under 1M as well to offer a great bending service to our customers. Along with a 2.5M long CNC press brake and 2 smaller 600mm machines we have all sheet metal bending needs covered under one roof.

Sheet metal blanks ready for bending

Sheet metal blanks ready for bending

The sheet metal blanks in this case have been manufactured by CNC punching but they could just as easily have been laser cut and they would have bent up just the same. Having the ability to provide the machine with accurate blanks batch after batch is vital to not only ensure the accuracy of the final folded parts but in enabling quick set up of the machine tools with minimal adjustments needed before production bending can start.

Whether you have a sheet metal working project than is just a few mm across or up to 3M long we can help you here at V and F Sheet Metal, please give us a call at 0.1489 57786.

  • «
  • 1
  • 2
  • 3
  • »
Get a Quote

Why not check out our blog for more information? Blog Post

Share or save this page 

Visit our social pages

V&F Sheet Metal on Facebook V&F Sheet Metal on Twitter V&F Sheet Metal YouTube Videos V&F Sheet Metal on Pinterest V&F Sheet Metal on Google+

Copyright © 2018

  | All rights reserved.