Sheet metal bracket
CNC punched Zintec brackets
Zintec is a zinc coated mild steel sheet metal whcih is often used for internal components with larger assemblies or where the final component is not effected by a corrosive environment. Good examples of this are PC back panels, components in fridges, light fittings, electrical enclosures etc. These particular brackets will be bent up and then used inside a control box used in the brewery industry. You can see that the curved profiles were created using banana shaped tooling on our Trumpf 3000 CNC punch press.
Folded stainless steel brackets
Stainless steel brackets
These brackets have been manufactured from 304 stainless steel on our Trumpf CNC punch presses and CNC press brakes. The bracket is quite complicated with many bends of different sizes and angles and yet the whole cycle of bending was carried out from one set up on the Trumpf 7036 CNC press brake. The bracket is used to suspend metal ceiling panels in large ships and is a great example of the versatility of brackets that can be manufactured with our plant on any one day for our customers.
Bent galvanised steel brackets
Galvanised steel brackets
These brackets have been produced from pre-galvanised mild steel sheet metal. They have been CNC punched out with all their holes and outer profile produced in seconds. The bends have all been produced on a Trumpf 7036 CNC press brake. These brackets are used inside a large flood light and carry all the electronics equipment needed to control the lamp.