Laser cut mild steel sheet metal blanks
Laser cut mild steel sheet metal blanks
Looking for clean cut mild steel blanks for chassis, brackets, folded trays, front panels, side plates etc then using our Trumpf 3030 fibre laser is a great place to start. These laser cut mild steel blanks were cut with oxygen for a perfect edge finish. Once they have been folded up they will be zinc plated and passivated which will remove any of the surface burn marks that can be seen in the photo. The finished component result is clean and square edges on both sides of the component.
Zintec fan housing end plates
Zintec fan housing end plates
Just another day and another sheet metal project, this time it’s Zintec. The batch of samples end plates will be used to prove a new design of fan housing end plate before going into full production numbers. Being able to CNC program, punch out and bend up these parts without the need for special tooling helped keep the costs down for our customer and speed up the delivery of the first batch test samples.
Light fitting sheet metal reflectors
Light fitting sheet metal reflectors
Using materials a little out of the ordinary is not a problem for us here at V and F Sheet Metal. Here we have just a small part of a batch of lighting reflectors that were CNC punched on our Trumpf 200 CNC punch press. The material is comes into us already anodised with a perfect surface finish and a heavy plastic peelable film to protect the front face during punching and bending. The material offers our customer a consistancy of lighting output that could not be adchieved with post production anodising in a complex reflector shape.
If you have a sheet metal work project coming up in the next few weeks / months please give us a call and see if you can help you.